CLI Guide

Layer 2 Switching Commands 715
The following example shows the detailed status of a VLAN session on
destination switch, where session is span across multiple switches.
console# show monitor session 1 detail
Session : 1
Type : Remote Destination Session
Source Ports :
RX Only : None
TX Only : None
Both : None
Source VLANs :
RX Only : None
Source RSPAN VLAN : 999
Destination Ports : Gi1/0/15
Dest RSPAN VLAN : None
show vlan remote-span
Use this command to display the RSPAN VLAN IDs.
Syntax
show vlan remote-span
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows the RSPAN VLANs configured on the switch.
console# show vlan remote-span
RSPAN Vlan