CLI Guide
Layer 2 Switching Commands 875
console(config)#show switchport ethertype interface gi1/0/1
Interface EtherType Secondary TPIDs
--------- --------- ---------------
Gi1/0/1 802.1
Gi1/0/2 802.1 VMAN
Gi1/0/3 802.1
Gi1/0/4 802.1
Gi1/0/5 802.1
show vlan
Use the show vlan command to display detailed information, including
interface information and dynamic VLAN type, for a specific VLAN or
RSPAN VLAN. The ID is a valid VLAN identification number.
Syntax
show vlan [id
vlan-id
|
name vlan-name
]
• vlan-id—A VLAN identifier
• vlan-name—A valid VLAN name (Range 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
• VLAN—The VLAN identifier
• Name—The VLAN name
• Ports—The port membership for the VLAN
• Type—The type of VLAN (default, static, dynamic)