CLI Guide

Layer 2 Switching Commands 894
no switchport private-vlan trunk native vlan vlan-id
no switchport private-vlan association trunk [ primary-vlan-id ]
no switchport private-vlan {host-association|mapping}
• host-association—Defines VLAN associations for community or host
ports.
• mapping—Defines the private VLAN mapping for promiscuous ports.
• primary-vlan-id—Primary VLAN ID of a private VLAN.
• secondary-vlan-id—Secondary (isolated or community) VLAN ID of a
private VLAN.
• add—Associates the secondary VLAN with the primary one.
• remove—Deletes the secondary VLANs from the primary VLAN
association.
• secondary-vlan-list—A list of secondary VLANs to be mapped to a primary
VLAN.
• mapping trunk—Maps the port to a primary VLAN and selected
secondary VLANs.
• trunk native vlan—Defines the VLAN association for untagged packets on
a trunk mode port. If not configured, untagged packets are dropped.
• trunk allowed vlan—Specifies the allowed normal VLANs on the trunk
port.
• association trunk—Associates a primary VLAN with a secondary isolated
VLAN. Multiple private VLAN pairs may be configured.
Default Configuration
This command has no default association or mapping configuration.
Command Mode
Interface Configuration (Ethernet or port-channel)