CLI Guide

Layer 2 Switching Commands 914
Command History
Command introduced in version 6.5 firmware.
show voice vlan
This command displays information about the voice VLAN.
Syntax
show voice vlan [interface {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port}|all]
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
• When the interface parameter is not specified, only the global mode of the
voice VLAN is displayed.
• When the interface parameter is specified, the following is displayed:
When the all parameter is used for the interface, all interfaces are displayed.
Output Description
Interface The interface ID.
Voice VLAN
Interface Mode
The admin mode of the voice VLAN on the interface.
Voice VLAN ID The voice VLAN ID.
Voice VLAN Priority The 802.1p priority for the voice VLAN on the port. This is only
displayed if configured.
Voice VLAN
Untagged
The tagging option for the voice VLAN traffic.
Voice VLAN COS
Override
The Override option for the voice traffic arriving on the port.
Voice VLAN Status The operational status of voice VLAN on the port.