CLI Guide

Security Commands 956
Example
console(config)# clear authentication statistics Gi1/0/1
Are you sure you want to clear authentication manager port stats? (y/n)
clear authentication authentication-history
Use this command to clear all 802.1X and authentication history.
Syntax
clear authentication authentication-history {all|interface-id}
• all—Clear all authentication history.
• interface-id—A physical (Ethernet) interface identifier.
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec mode
User Guidelines
The all parameter clears all 802.1X and Authentication Manager history on
the switch. Use of the interface parameter clears the history for the specific
interface.
Command History
The clear dot1x authentication-history syntax was deprecated in favor of the
clear authentication authentication-history in version 6.6 firmware.
Example
console(config)# clear authentication authentication-history Gi1/0/1
enable password
Use the enable password command in Global Configuration mode to set a
local password to control access to the privileged Exec mode. To remove the
password requirement, use the no form of this command.