CLI Guide

Security Commands 967
User Guidelines
The command displays the following information:
Output Parameter Description
Authentication
Manager Status
The administrative status of Authentication on the
switch. This is a global configuration value.
Interface The interface for which authentication configuration
information is being displayed.
Port Control Mode The configured control mode for this port. Possible values are
force-unauthorized | auto | unauthorized.
Host Mode The authentication host mode configured on the interface.
Authentication
Restart Time
The time in seconds after which reauthentication starts.
Configured Method
Order
The order of authentication methods used on the interface.
Enabled Method
Order
The order of authentication methods used on the interface.
Configured Method
Priority
The priority for the authentication methods used on the
interface.
Enabled Method
Priority
The priority for the authentication methods used on the
interface.
Reauthentication
Period
The period after which all clients on the interface will be
reauthenticated.
Reauthentication
Enabled
Indicates whether reauthentication is enabled on the interface.
Maximum Users The maximum number of clients that can be authenticated on
the interface if the interface is configured as multi-auth host
mode.
Guest VLAN ID The VLAN id to be used to authorize clients that time out or
fail authentication due to invalid credentials. This is applicable
only for 802.1x unaware clients.
Unauthenticated
VLAN ID
The VLAN id to be used to authorize clients that that time out
or fail authentication due to invalid credentials. This is
applicable only for 802.1x clients.