Setup Guide

160 はじめに
To set up the SNMP management account you must specify
the management system IP address and the “community
string” or password that the particular management
system uses to access the switch. The wizard
automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell
Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
メモ： If it is configured, the default access level is set to the highest available
access for the SNMP management interface.（これが設定されると、デフォ
ルトのアクセスレベルは SNMP 管理インタフェースで利用できる最高のア
クセスレベルに設定されます。） Initially only SNMPv2 will be activated.（最初
に SNMPv2 のみ有効になります。） SNMPv3 is disabled until you return to
configure security access for SNMPv3 (e.g. engine ID, view, etc.).（SNMPv 3 用
の安全アクセスの設定（エンジン ID、ビューなど）に戻るまで、SNMPv 3
は無効です。）
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 10.1.2.100
Step 2:
Now we need to set up your initial privilege (Level
15) user account. This account is used to login to the
CLI and Web interface. You may set up other accounts
and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation.
To set up a user account:
Please enter the user name. [root]:admin
Please enter the user password: ********
Please reenter the user password: ********