Setup Guide

262 | הדובע תליחת ךירדמ
To set up the SNMP management account you must
specify the management system IP address and the
“community string” or password that the particular
management system uses to access the switch. The
wizard automatically assigns the highest access level
[Privilege Level 15] to this account. You can use
Dell Network Manager or other management interfaces
to change this setting, and to add additional
management system information later. For more
information on adding management systems, see the
user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
הרעה :םא תמר השיגה תרדגומ ,רעך תרירב לדחמה הלש רדגומ השיגל תלעב תונימזה
ההובגה רתויב רובע קשממ לוהינה לוקוטורפב SNMP. הליחתב ,לעפוי SNMPv2 דבלב .
SNMPv3 תבשומ דע רוזחתש עובקל תא הרוצתה לש תשיג החטבאה רובע SNMPv3
)המגודל ,ההזמ ןונגנמ ,הגוצת המודכו .(
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 10.1.2.100
Step 2:
Now we need to set up your initial privilege (Level
15) user account. This account is used to login to
the CLI and Web interface. You may set up other
accounts and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation.
To set up a user account:
Please enter the user name. [root]:admin
Please enter the user password: ********
Please reenter the user password: ********