Users Guide

Authentication, Authorization, and Accounting 369
Figure 9-10. Adding an IAS User
4 Click Apply.
To view the Internal Authentication Server Users Table page, click Show All.
To delete an IAS user:
1 Open the Internal Authentication Server Users Configuration page.
2 From the User menu, select the user to remove, select the user to remove.
3 Select the Remove check box.
Figure 9-11. Removing an IAS User
4 Click Apply.
Configuring IEEE 802.1X (CLI)
This section provides information about commands you use to configure
802.1X and Port Security settings. For additional information about the
commands in this section, see the Dell EMC Networking N1100-ON, N1500,
N2000, N2100-ON, N2200-ON, N3000E-ON, N3100-ON, and N3200-ON
Series Switches CLI Reference Guide at www.dell.com/support.