Administrator Guide

Audio Visual Bridging Commands 1151
Command History
Introduced in version 6.2.0.1 firmware.
Example
console#show dot1as interface summary
Intf Mode asCapable measuringPdelay Pdelay Role
------- ------- --------- --------------- ------ --------
Gi1/0/1 Enabled No No 0 Disabled
Gi1/0/2 Enabled Yes Yes 811 Master
Gi1/0/3 Enabled No No 0 Disabled
Gi1/0/4 Enabled Yes Yes 806 Master
Gi1/0/5 Enabled No No 0 Disabled
console#show dot1as interface gi1/0/1
AS Interface Admin Mode................... Enabled
AS Capable................................ No
Is Measuring Delay............................. No
Propagation Delay.............................. 0
Initial Sync Interval Specifies the configured mean time interval between
successive SYNC messages, in logarithm to base 2
format
Current Pdelay interval Specifies the current mean time interval between
successive PDELAY_REQ messages sent over a link, in
logarithm to base 2 format.
Current Announce Interval Specifies the current mean time interval between
successive ANNOUNCE messages in logarithm to base
2 format.
Current Sync Interval Specifies the current mean time interval between
successive SYNC messages, in logarithm to base 2
format
Sync Timeout Specifies the number of SYNC intervals that have to
pass without receipt of SYNC information, before
considering that the master is no longer transmitting.
Announce Timeout Specifies the number of ANNOUNCE intervals that
have to pass without receipt of ANNOUNCE PDU,
before considering that the master is no longer
transmitting.