Administrator Guide

Layer 3 Routing Commands 1784
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
If no parameters are entered, the command displays the LSA headers.
Optional parameters specify the type of link state advertisements to display.
The information below is only displayed if OSPF is enabled.
Example
The following example displays information about the link state database
when OSPFv3 is enabled.
console#show ipv6 ospf database
Router Link States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1 0 4 80000034 54BD V6E--R- ----B
2.2.2.2 0 2 80000044 95A5 V6E--R- ----B
Network Link States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
2.2.2.2 636 636 80000001 8B0D V6E--R-
Inter Network States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1 1 323 80000001 3970
2.2.2.2 1 322 80000001 1B8A
1.1.1.1 2 293 80000001 3529
2.2.2.2 2 375 80000001 FC5E
Link States (Area 0.0.0.0)
Adv Router Link Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1 634 700 80000008 2D89 V6E--R-
2.2.2.2 634 689 8000000A 6F82 V6E--R-
2.2.2.2 635 590 80000001 7782 V6E--R-
Intra Prefix States (Area 0.0.0.0)