Administrator Guide

Dell EMC Networking CLI 210
debug sflow Enables sFlow debug packet trace. PE
debug spanning-tree Traces spanning tree BPDU packet reception
and transmission.
PE
debug spanning-tree Traces spanning tree BPDU packet reception
and transmission.
PE
debug udld Enables the display of UDLD packets or event
processing.
PE
debug vpc Enables debug traces for the specified protocols GC
debug vrrp Enables VRRP debug protocol messages. PE
exception core-file Configures the core dump file name. GC
exception dump Configures the core dump location. GC
exception protocol Enables full core dumps. GC
exception switch-chip-
register
Enables the dumping of the switch chip
registers in case of an exception.
GC
ip http timeout-policy Configures the timeout policy for closing HTTP
and HTTPS sessions to the local HTTP server.
GC
show debugging Displays packet tracing configurations. PE
show supported mibs Displays the HTTP server status and
configuration.
PE,
GC
show supported mibs Displays the implemented SNMP MIBs. PE,
GC
snapshot bgp Dumps a set of BGP debug information to
capture the current state of BGP.
S
write core Generates a core file on demand and either,
reboots the switch or tests the core file
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a