Administrator Guide
Switch Management Commands 2224
• Dell EMC Networking N3024F
• Dell EMC Networking N3024P
• Dell EMC Networking N3048
• Dell EMC Networking N3048P
• Dell EMC Networking N4032
• Dell EMC Networking N4032F
• Dell EMC Networking N4064
• Dell EMC Networking N4064F
• Dell SFP+ Card
• Dell QSFP Card
• Dell 10GBase-T Card
Use the no form of the command to return the unit/slot configuration to the
default value.
Syntax
slot
unit/slot
cardindex
no slot unit/slot
• unit/slot — The slot identifier of the slot.
• cardindex — The index into the database of the supported card types
(see
show supported cardtype
) indicating the type of card being
preconfigured in the specified slot. The card index is a 32-bit integer.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
The card index (CID) can be obtained by executing the
show supported
cardtype
command.
Administrators may issue multiple consecutive slot commands addressing a
particular unit/slot without issuing an intervening no slot command.