Users Guide

Hardware Overview 99
3
Hardware Overview
This section provides an overview of the switch hardware. It is organized by
product type:
• Dell EMC Networking N1100-ON Series Switch Hardware
• Dell EMC Networking N1500 Series Switch Hardware
• Dell EMC Networking N2000 Series Switch Hardware
• Dell EMC Networking N2100-ON Series Switch Hardware
• Dell EMC Networking N3000E-ON Series Switch Hardware
• Dell EMC Networking N3100-ON Series Switch Hardware
• Switch MAC Addresses
• Switch MAC Addresses
Dell EMC Networking N1100-ON Series Switch
Hardware
This section contains information about device characteristics and modular
hardware configurations for the Dell EMC Networking N1100-ON switch.
Front Panel
The N1108-ON models are half-width, 1U, rack-mountable switches. To rack-
mount the N1108-ON switches, either the Dell EMC Rack Mount Kit or the
Dell EMC Tandem Tray Kit is required. The N1124-ON and N1148-ON
models are full-width, 1U, rack mountable switches.
The Dell EMC Networking N1108-ON front panel provides eight
10/100/1000BASE-T Ethernet RJ-45 ports, capable of full or half duplex
operation, two 100/1000BASE-T RJ45 uplink ports capable of full duplex
operation only, and two SFP ports. The SFP ports are capable of 1G full
duplex operation only. The N1108P-ON supports two PoE+ or four PoE ports
on Gigabit Ethernet ports 1-4. Dell-qualified SFP transceivers are sold
separately.