Users Guide

Link Aggregation 1023
interface gi1/0/1 Enter physical interface configuration mode for a member
of the desired LAG.
A range of physical interfaces can be specified using the
interface range command. For example, interface range
gi1-3,10 configures Gigabit Ethernet interfaces 1, 2, 3, and
10.
lacp port-priority value Set the Link Aggregation Control Protocol priority for the
port or range of ports. The priority value range is 1–65535.
lacp timeout {long |
short}
Specify whether to wait a long or short time between
LACP PDU transmissions.
exit Exit to Privileged Exec mode.
show lacp interface View LACP parameters for an Ethernet interface or a LAG.
The interface parameter includes the interface type
(gigabitethernet, tengigabitethernet, or forty-
gigabitethernet) and number.
Command Purpose