Users Guide

DHCP Server Settings 1099
Address Pool Options
Use the Address Pool Options page to view manually configured options.
Options can be defined when an address pool is created or can be added to
existing address pools.
To display the Address Pool Options page, click Routing  IP  DHCP
Server  Address Pool Options in the navigation panel.
Figure 28-8. Address Pool Options
Defining DHCP Options
To configure DHCP options:
1 Open the Address Pool page.
2 Select the Add Options check box.
3 Select the check box that corresponds to the value type (ASCII,
Hexadecimal, or IP address).
4 Specify the value(s) in the corresponding field.
Figure 28-9 shows an example of adding the SMTP server IP address. The
option code for the SMTP server is 69, and the IP address of the SMTP
server is 192.168.10.15.