Users Guide

Layer-2 and Layer-3 Relay Features 1165
Configuring L2 and L3 Relay Features (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring L2 and L3 relay features
on Dell EMC Networking N1100-ON, N1500, N2000, N2100-ON, N3000E-
ON, and N3100-ON Series switches. For details about the fields on a page,
click at the top of the Dell EMC OpenManage Switch Administrator
web page.
L2 DHCP Relay Global Configuration
Use this page to enable or disable the switch to act as a DHCP Relay agent.
This functionality must also be enabled on each port you want this service to
operate on (see "L2 DHCP Relay Interface Configuration" on page 1166).
The switch can also be configured to relay requests only when the VLAN of
the requesting client corresponds to a service provider’s VLAN ID that has
been enabled with the L2 DHCP relay functionality (see "L2 DHCP Relay
VLAN Configuration" on page 1169).
To access this page, click Switching  DHCP Relay  Global
Configuration in the navigation panel.
Figure 31-1. DHCP Relay Global Configuration