Users Guide

OSPF and OSPFv3 1243
Configuring Stub Areas and NSSAs
Use the following commands to configure OSPFv3 stub areas and NSSAs.
show ipv6 ospf interface
[interface-type interface-
number]
View summary information for all OSPFv3 interfaces
configured on the switch or for the specified routing
interface.
show ipv6 ospf interface
stats interface-type
interface-number
View per-interface OSPFv3 statistics.
Command Purpose
configure Enter global configuration mode.
ipv6 router ospf Enter OSPFv3 configuration mode.
area area-id stub Create a stub area for the specified area ID.
area area-id stub no-
summary
Prevent Summary LSAs from being advertised into the
stub area. This command creates a totally stubby area
when used in conjunction with the previous command.
area area-id default-cost
cost
Configure the metric value (default cost) for the type 3
summary LSA sent into the stub area. Range: 1–
16777215)
Command Purpose