Users Guide

1244 OSPF and OSPFv3
area area-id nssa [no-
redistribution] [default-
information-originate
[metric metric-value]
[metric-type metric-type-
value]] [no-summary]
[translator-role role]
[translator-stab-intv
interval]
Create and configure an NSSA for the specified area ID.
• metric-value—Specifies the metric of the default route
advertised to the NSSA. (Range: 1–16777214)
• metric-type-value—The metric type can be one of the
following :
• A metric type of nssa-external 1 (comparable)
• A metric type of nssa-external 2 (non-comparable)
• no-summary—Summary LSAs are not advertised into
the NSSA
• role—The translator role where role is one of the
following :
• always—The router assumes the role of the translator
when it becomes a border router.
• candidate—The router to participate in the translator
election process when it attains border router status.
• interval—The period of time that an elected translator
continues to perform its duties after it determines that
its translator status has been deposed by another router.
(Range: 0–3600)
area area-id nssa
no-redistribution
Prevent learned external routes from being redistributed
to the NSSA.
exit Exit to Global Config mode.
exit Exit to Privileged Exec mode.
show ipv6 ospf area area-
id
Show configuration and status of an OSPF area.
Command Purpose