Users Guide

Hardware Overview 137
Figure 3-17. Dell EMC Networking N3024EF-ON with 24 10/100/1000BASE-T Ports (Front
Panel)
The Dell EMC Networking N3000E-ON Series switch includes two combo
ports. The combo ports are SFP on the Dell EMC Networking N3000E-ON
Series and 1000BASE-T on the Dell EMC Networking N3024EF-ON switch.
The combo ports are set to prefer fiber. A fiber combo port may flap once
after powering up the transceiver and detecting that a change in the interface
mode is required. If using the 1000BASE-T port, remove any transceivers from
the SFP port.
Figure 3-18. Dell EMC Networking N3048ET-ON with 48 10/100/1000BASE-T Ports (Front
Panel)
The additional ports are on the right side of the front panel, as shown in
Figure 3-18 and Figure 3-19.
Combo
Ports
10/100/1000BASE-T Auto-sensing
Full Duplex RJ-45 Ports
SFP+
Ports
10/100/1000BASE-T Auto-sensing
Full Duplex RJ-45 Ports
Combo
Ports
SFP+
Ports