Users Guide

190 Setting Basic Network Information
Figure 7-1. Out of Band Interface
To enable the DHCP client and allow a DHCP server on your network to
automatically assign the network information to the OOB interface, select
DHCP from the Protocol menu. If the network information is statically
assigned, ensure that the Protocol menu is set to None.
IP Interface Configuration (Default VLAN IP Address)
Use the IP Interface Configuration page to assign the default VLAN IP
address and subnet mask, the default gateway IP address, and to assign the
boot protocol.
To display the IP Interface Configuration page, click Routing  IP 
IP Interface Configuration in the navigation panel.