Users Guide

Managing General System Settings 423
11
Managing General System Settings
Dell EMC Networking N-Series Switches
This chapter describes how to set system information, such as the hostname,
and time settings, and how to select the Switch Database Management
(SDM) template to use on the switch.
For the Dell EMC Networking N1500, N2000, N2100-ON, N3000-ON, and
N3100-ON Series switches, this chapter also describes how to configure the
Power over Ethernet (PoE) settings. For the Dell EMC Networking N3000E-
ON and N3100-ON Series switches, this chapter also describes how to view
back-panel expansion slot information.
The topics covered in this chapter include:
• System Settings Overview
• Default General System Information
• Configuring General System Settings (Web)
• Configuring System Settings (CLI)
• General System Settings Configuration Examples
System Settings Overview
The system settings include the information described in Table 11-1. This
information helps identify the switch.
Table 11-1. System Information
Feature Description
System Name The switch name (host name). If the system name is changed,
the CLI prompt changes from console to the system name.
System contact Identifies the person to contact for information regarding the
switch.
System location Identifies the physical location of the switch.
Asset tag Uniquely identifies the switch. Some organizations use asset tags
to identify, control, and track each piece of equipment.