Users Guide

798 VLANs

Figure 20-26. Network Topology for LAG with RPVST and Voice VLAN

MLAG Primary Peer Configuration

Configure the MLAG primary switch.

Keepalives are disabled on the peer links (optional). The four peer-links are

placed in port-channel 3. Port-channel 1 is the northbound (partner 1)

MLAG interface in VPC 1 and port-channel 4 is the southbound (partner

2) interface in VPC 4. Finally, VPC is enabled and the VPC domain is set

to 1.

console#config

console(config)#interface Te1/0/1

console(config-if-Te1/0/1)#channel-group 3 mode active

console(config-if-Te1/0/1)#no keepalive

console(config-if-Te1/0/1)#exit

console(config)#interface Te1/0/2