Administrator Guide

Security Commands 1005
Example
console(config)#captive-portal
console(config-CP)#
enable
Use the enable command to globally enable captive portal. Use the “no” form
of this command to globally disable captive portal.
Syntax
enable
no enable
Default Configuration
Captive Portal is disabled by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#enable
http port
Use the http port command to configure an additional HTTP port for captive
portal to listen for connections. Use the “no” form of this command to
remove the additional HTTP port from monitoring.
Syntax
http port port-num
no http port
• port-num —The port number on which the HTTP server listens for
connections
( Range: 1025–65535).
2CSNXXX_SWUM204.book Page 1005 Monday, January 25, 2016 1:25 PM