Administrator Guide

Layer 3 Routing Commands 1519
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays IGMP information for VLAN 11.
console#show ip igmp vlan 11
Interface..................................... 11
IGMP Admin Mode............................... Enable
Interface Mode................................ Enable
IGMP Version.................................. 3
Query Interval (secs)......................... 125
Query Max Response Time (1/10 of a second).... 100
Robustness..................................... 2
Startup Query Interval (secs)................. 31
Startup Query Count............................ 2
Last Member Query Interval (1/10 of a second). 10
Last Member Query Count........................ 2
show ip igmp membership
Use the show ip igmp membership command in Privileged Exec mode to
display the list of interfaces that have registered in the multicast group. If
detail is specified, this command displays detailed information about the
listed interfaces.
Syntax
show ip igmp membership [ groupaddr ] [detail]
• groupaddr — Group IP address
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 1519 Monday, January 25, 2016 1:25 PM