Administrator Guide

Layer 3 Routing Commands 1626
Example
The following example displays the IPv6 status of forwarding mode and IPv6
unicast routing mode.
console#show ipv6 brief
IPv6 Unicast Routing Mode.................... Enable
IPv6 Hop Limit............................... Unconfigured
ICMPv6 Rate Limit Error Interval............. 1000 msec
ICMPv6 Rate Limit Burst Size................. 100 messages
show ipv6 interface
Use the show ipv6 interface command in Privileged Exec mode to show the
usability status of IPv6 interfaces. The output of the command includes the
method of assignment for each IPv6 address that is either autoconfigured or
leased from a DHCP server. Global addresses with no annotation are assumed
to be manually configured.
Syntax
show ipv6 interface [brief] [loopback loopback-id | tunnel tunnel-id | vlan
vlan-id [prefix]]
• loopback-id —Valid loopback interface ID
•
tunnel-id —Valid tunnel interface ID
•
vlan-id —Valid VLAN ID
•
prefix —Display IPv6 Interface Prefix Information.
Default Configuration
Displays all IPv6 interfaces.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
The Method field contains one of the following values.
2CSNXXX_SWUM204.book Page 1626 Monday, January 25, 2016 1:25 PM