Administrator Guide

Layer 3 Routing Commands 1675
show ip mroute
Use the show ip mroute command in Privileged Exec mode to display a
summary or details of the multicast table.
Syntax
show ip mroute
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip mroute
Multicast route table
Expiry Up Time
Source IP Group IP (mm:ss) (hh:mm:ss) RPF Neighbor Flags
--------------- --------------- -------- ----------- --------------- -----
192.168.0.11 239.0.5.7 3:03 15:54:12 192.168.0.10
show ip mroute group
Use the show ip mroute group command in Privileged Exec mode to display
the multicast configuration settings such as flags, timer settings, incoming
and outgoing interfaces, RPF neighboring routers, and expiration times of all
the entries in the multicast mroute table containing the
groupipaddr value.
Syntax
show ip mroute group groupipaddr [summary]
• groupipaddr — IP address of the multicast group.
2CSNXXX_SWUM204.book Page 1675 Monday, January 25, 2016 1:25 PM