Administrator Guide

Layer 3 Routing Commands 1879
show ip rip interface brief
Use the show ip rip interface brief command in Privileged Exec mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Send Receive RIP Link
Interface IP Address Version Version Mode State
---------- ---------- -------- ----------- --------- ----------
vlan1 0.0.0.0 RIP-2 Both Disable Down
vlan2 0.0.0.0 RIP-2 Both Disable Down
split-horizon
Use the split-horizon command in Router RIP Configuration mode to set the
RIP split horizon mode. Use the no form of the command to return the mode
to the default value.
Syntax
split-horizon {none | simple | poison}
no split-horizon
2CSNXXX_SWUM204.book Page 1879 Monday, January 25, 2016 1:25 PM