Administrator Guide

Switch Management Commands 1978
Syntax
show running-config [all | interface interface-id [all] | scriptname ]
• all —Display or capture the complete configuration, including settings
equal to the defaults.
•
interface-id —An interface identifier (logical or physical). Limits the
display to the specified interface.
•
scriptname —If the optional scriptname is provided, the output is
redirected to a script file.
NOTE: If you issue the show running-config command from a serial connection,
access to the switch through remote connections (such as Telnet) is suspended
while the output is being generated and displayed.
Default Configuration
By default, the show running-config command displays non-default values.
Default configuration values are suppressed in the output. Use the all
parameter to display both default and non-default values.
Command Mode
Privileged Exec mode , Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
This example shows the truncated output for the configuration of interface
Gi1/0/1. Since the all parameter is given, both the non-default and the
default values are shown.
console#show running-config interface gi1/0/1 all
speed auto
storm-control broadcast level 5
storm-control broadcast level 5
no storm-control broadcast
storm-control multicast level 5
storm-control multicast level 5
no storm-control multicast
2CSNXXX_SWUM204.book Page 1978 Monday, January 25, 2016 1:25 PM