Administrator Guide

Switch Management Commands 2131
Syntax
snmp-server group groupname { v1 | v2 | v3 { noauth | auth | priv } [
notify
notifyview ] } [ context contextname ] [ read readview ] [ write
writeview ]
no snmp-server group
groupname { v1 | v2 | v3 { noauth | auth | priv } } [
context
contextname ]
• groupname — Specifies the name of the group. (Range: 1-30 characters.)
•
v1 — Indicates the SNMP Version 1 security model.
•
v2 — Indicates the SNMP Version 2 security model.
•
v3 — Indicates the SNMP Version 3 security model.
•
noauth — Indicates no authentication of a packet. Applicable only to the
SNMP Version 3 security model.
•
auth — Indicates authentication of a packet without encrypting it.
Applicable only to the SNMP Version 3 security model.
•
priv — Indicates authentication of a packet with encryption. Applicable
only to the SNMP Version 3 security model.
•
contextname — Provides different views of the system and provides the
user a way of specifying that context.
•
notifyview — Defines a string that is the name of the view that enables
specifying an inform or a trap. If unspecified, nothing is defined for the
notify view. (Range: 1-30 characters.)
•
readview — A string that is the name of the view that enables the you to
view only the contents of the agent. If unspecified, all the objects except
for the community-table and SNMPv3 user and access tables are available.
(Range: 1-30 characters.)
•
writeview — A string that is the name of the view that enables the user to
enter data and configure the contents of the agent. If unspecified, nothing
is defined for the write view. (Range: 1-30 characters.)
Default Configuration
No group entry exists. There will be some default groups for
Read/Write/Super users. These groups cannot be deleted or modified by the
user. This command is used only to configure the user-defined groups.
2CSNXXX_SWUM204.book Page 2131 Monday, January 25, 2016 1:25 PM