Administrator Guide

Switch Management Commands 2302
show ip http server secure status
Use the show ip http server secure status command in User Exec or Privileged
Exec mode to display the HTTP secure server status information.
Syntax
show ip http server secure status
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays an HTTPS server configuration with DH Key
exchange enabled.
console#show ip http server secure status
HTTPS server enabled. Port: 443
DH Key exchange enabled.
Certificate 1 is active
Issued by: www.verisign.com
Valid from: 8/9/2003 to 8/9/2004
Subject: CN= router.gm.com, 0= General Motors, C= US
Finger print: DC789788 DC88A988 127897BC BB789788
Certificate 2 is inactive
Issued by: self-signed
Valid from: 8/9/2003 to 8/9/2004
Subject: CN= router.gm.com, 0= General Motors, C= US
Finger print: 1873B936 88DC3411 BC8932EF 782134BA
The following example displays the HTTPS server configuration with DH Key
exchange disabled.
console#show ip http server secure status
HTTPS server enabled. Port: 443
DH Key exchange disabled, parameters are being generated.
2CSNXXX_SWUM204.book Page 2302 Monday, January 25, 2016 1:25 PM