Administrator Guide

Layer 2 Switching Commands 404
Broadcast Packets Received..................... 0
Total Packets Received with MAC Errors......... 0
Jabbers Received............................... 0
Fragments/Undersize Received................... 0
Alignment Errors............................... 0
FCS Errors..................................... 0
Overruns....................................... 0
Total Received Packets Not Forwarded........... 7
Total Packets Transmitted Successfully......... 147070
Unicast Packets Transmitted.................... 0
Multicast Packets Transmitted.................. 147070
Broadcast Packets Transmitted.................. 0
Transmit Packets Discarded..................... 0
Total Transmit Errors.......................... 0
Total Transmit Packets Discarded............... 0
Single Collision Frames........................ 0
Multiple Collision Frames...................... 0
Excessive Collision Frames..................... 0
console#show interfaces po1
Channel Ports Ch-Type Hash Type Min-links Local Prf
------- ----------------------------- -------- --------- --------- --------
Po1 Active: Gi1/0/1 Dynamic 7 1 Disabled
Hash Algorithm Type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
show interfaces advertise
Use the show interfaces advertise command in Privileged Exec mode to
display information about auto-negotiation advertisement. The display
includes the local configuration and link partner advertisement, in addition
to the local advertisement.
Syntax
show interfaces advertise [{gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port
| fortygigabitethernet unit/slot/port}]
2CSNXXX_SWUM204.book Page 404 Monday, January 25, 2016 1:25 PM