Users Guide

Table Of Contents
64 Switch Feature Overview
The Dell EMC Networking N2000 and N2100-ON Series switches have two
fixed mini-SAS stacking connectors at the rear. Any unit may be the stack
primary unit.
Dell EMC Networking N2000 Series switches stack with other Dell EMC
Networking N2000 Series switches and with Dell EMC Networking N2100-
ON Series switches stack in a stack of up to eight units. The mixed stacking
image name is N2000N2100Stdv6.5.1.X.itb.
Dell EMC Networking N2200-ON Series switches stack with other Dell EMC
Networking N2200-ON Series switches in a stack of up to 12 units. The image
name is N2200E-ONv6.6.X.Y.stk.
Dell EMC Networking N2100-ON and N2000 switch series firmware is also
available without mixed stacking capabilities. These images are named as
follows:
N2100Stdv6.5.1.X.stk - N2100 only stack
N2000Stdv6.5.1.X.stk - N2000 only stack
Dell EMC Networking N3100-ON Series switches stack with the Dell EMC
Networking N3000E-ON switches in a stack of up to 12 units. The image
name is N3000N3100Advv6.5.1.x.itb. Any unit may be the stack primary.
N3024/N3024P/N3034F/N3048/N3048P units will be recognized if stacked
with this image. However, the front panel interfaces will remain detached and
inoperable.
Dell EMC Networking N3100-ON and N3000E-ON switch series firmware is
also available without mixed stacking capabilities. These images are named as
follows:
N3100Advv6.5.1.X.stk - N3100 only stack
N3000E-ONAdvv6.5.1.X.stk - N3000E-ON only stack
Dell EMC Networking N3200-ON Series switches stack with other Dell EMC
Networking N3200-ON Series switches in a stack of up to 12 units using the
2x50G stacking ports. The image name is N3200-ONv6.6.X.Y.stk.