Users Guide

Hardware Overview 109

Hardware Overview

This section provides an overview of the switch hardware. It is organized by

product type:

• Dell EMC Networking N1100-ON Series Switch Hardware

• Dell EMC Networking N1500 Series Switch Hardware

• Dell EMC Networking N2000 Series Switch Hardware

• Dell EMC Networking N2100-ON Series Switch Hardware

• Dell EMC Networking N2200-ON Series Switch Hardware

• Dell EMC Networking N3100-ON Series Switch Hardware

• Switch MAC Addresses

Dell EMC Networking N1100-ON Series Switch

Hardware

This section contains information about device characteristics and modular

hardware configurations for the Dell EMC Networking N1100-ON switch.

N1100-ON Series Front Panel

The N1108-ON models are half-width, 1U, rack-mountable switches. To rack-

mount the N1108-ON switches, either the Dell EMC Rack Mount Kit or the

Dell EMC Tandem Tray Kit is required. The N1124-ON and N1148-ON

models are full-width, 1U, rack mountable switches.

The Dell EMC Networking N1108-ON front panel provides eight

10/100/1000BASE-T Ethernet RJ-45 ports, capable of full-duplex or

half-duplex operation, two 100/1000BASE-T RJ-45 uplink ports capable of

full-duplex operation only, and two SFP ports. The SFP ports are capable of

1G full-duplex operation only. The N1108P-ON supports two PoE+ or four

PoE ports on Gigabit Ethernet ports 1-4. Dell-qualified SFP transceivers are

sold separately.