Users Guide

IPv4 and IPv6 Multicast 1623
ip multicast ttl-threshold
ttlvalue
Apply a Time to Live (TTL) value to the VLAN
interface. The ttlvalue is the TTL threshold which is
applied to the multicast data packets forwarded
through the interface.
exit Exit to Global Config mode.
exit Exit to Privileged Exec mode.
show ip multicast View system-wide multicast information.
show ip mcast boundary
{vlan vlan-id | all}
View all the configured administrative scoped multicast
boundaries.
show ip mcast mroute
{detail | summary}
View a summary or all the details of the multicast table.
show mac address-table
multicast [count]
View information about the entries in the multicast
address table.
show ip mcast mroute
group groupipaddr {detail |
summary}
View the multicast configuration settings such as flags,
timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
groupipaddr value.
show ip mcast mroute
source sourceipaddr
{summary | groupipaddr}
View the multicast configuration settings such as flags,
timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
sourceipaddr or sourceipaddr | groupipaddr pair
value(s).
show ip mcast mroute static
[sourceipaddr]
View all the static routes configured in the static mcast
table if it is specified or display the static route
associated with the particular sourceipaddr.
Command Purpose