Administrator Guide

Security Commands 1007
Example
console(config-CP)#https port 1443
console(config-CP)#no https port
show captive-portal
Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
Captive Portal IP Address................. 1.2.3.4
show captive-portal status
Use the show captive-portal status command to report the status of all
captive portal instances in the system.
Syntax
show captive-portal status
2CSNXXX_SWUM204.book Page 1007 Monday, January 25, 2016 1:25 PM