Administrator Guide

Security Commands 1008
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal status
Additional HTTP Port........................... 81
Additional HTTP Secure Port.................... 1443
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
Configured Captive Portals..................... 1
Active Captive Portals......................... 0
Local Supported Users.......................... 128
Configured Local Users......................... 3
System Supported Users......................... 1024
Authenticated Users............................ 0
Captive Portal Configuration Commands
The commands in this section are related to captive portal configurations.
block
Use the block command to block all traffic for a captive portal configuration.
Use the “no” form of this command to unblock traffic.
Syntax
block
no block
Default Configuration
Traffic is not blocked by default.
2CSNXXX_SWUM204.book Page 1008 Monday, January 25, 2016 1:25 PM