Administrator Guide

Security Commands 1018
User Name................................. user123
Session Time.............................. 0d:00:00:13
show captive-portal configuration client status
Use the show captive-portal configuration client status command to display
the clients authenticated to all captive portal configurations or a to specific
configuration.
Syntax
show captive-portal configuration [ cp-id ] client status
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name Client MAC Address Client IP Address Interface
----- --------------- ------------------ ----------------- ---------
1 cp1 0002.BC00.1290 10.254.96.47 Gi1/0/1
0002.BC00.1291 10.254.96.48 Gi1/0/2
2 cp2 0002.BC00.1292 10.254.96.49 Gi1/0/3
3 cp3 0002.BC00.1293 10.254.96.50 Gi1/0/4
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client Client
MAC Address IP Address Interface Interface Description
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47 Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
0002.BC00.1291 10.254.96.48 Gi1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit
2CSNXXX_SWUM204.book Page 1018 Monday, January 25, 2016 1:25 PM