Administrator Guide

Security Commands 1019
show captive-portal interface client status
Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
Syntax
show captive-portal interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port} client
status
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface client status
Client Client
Intf Intf Description MAC Address IP Address
------ ----------------------------------- ----------------- ---------------
Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit 0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48
Gi1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit 0002.BC00.1292 10.254.96.49
Gi1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit 0002.BC00.1293 10.254.96.50
console#show captive-portal interface gi1/0/1 client status
Interface................................. Gi1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address IP Address CP ID CP Name Protocol Verification
----------------- --------------- ----- ----------------- -------- ---------
0002.BC00.1290 10.254.96.47 1 cp1 http local
0002.BC00.1291 10.254.96.48 2 cp2 http local
2CSNXXX_SWUM204.book Page 1019 Monday, January 25, 2016 1:25 PM