Administrator Guide

Security Commands 1030
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration status
CP ID CP Name Mode Protocol Verification
----- --------------- -------- -------- ------------
1 cp1 Enable https Guest
2 cp2 Enable http Local
3 cp3 Disable https Guest
console#show captive-portal configuration 1 status
CP ID.......................................... 1
CP Name........................................ cp1
Mode........................................... Enabled
Protocol Mode.................................. https
Verification Mode.............................. Guest
Group Name..................................... group123
Redirect URL Mode.............................. Enabled
Redirect URL................................... www.cnn.com
Session Timeout (seconds)...................... 86400
Captive Portal User Group Commands
user group
Use the user group command to create a user group. Use the no form of this
command to delete a user group. The default user group (1) cannot be
deleted.
Syntax
user group group-id
no user group group-id
group-id
— Group ID (Range: 1–10).
Default Configuration
User group 1 is created by default and cannot be deleted.
2CSNXXX_SWUM204.book Page 1030 Monday, January 25, 2016 1:25 PM