Administrator Guide

Dell Networking CLI 103
Layer 2 Commands
ACL
Command Description Mode
a
ip access-list Creates an Access Control List (ACL) that is
identified by the parameter
accesslistnumber.
GC
deny | permit (IP ACL) The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
deny | permit (Mac-Access-
List-Configuration)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL)
identified by the
name parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC
remark Adds a comment to an ACL rule. IPAF4,
IPAF,
ML,
ARPA
service-acl input Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
IC
show access-lists interface Displays interface ACLs. PE
show service-acl interface Displays the status of LLPF rules configured on
a particular port or on all the ports.
PE
2CSNXXX_SWUM204.book Page 103 Monday, January 25, 2016 1:25 PM