Administrator Guide

Security Commands 1050
• priority priority — Priority for the rule. (Range: 1–64)
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with gigabitethernet, tengigabitethernet, fortygigabitethernet, vlan,
and port-channel parameters are valid only if an IP address is defined on the
appropriate interface. Ensure that each rule has a unique priority.
Example
The following example shows how all ports are denied in the access-list called
mlist .
console(config)# management access-list mlist
console(config-macal)# deny
management access-class
Use the management access-class command in Global Configuration mode
to restrict switch management connections. To disable any restrictions, use
the no form of this command.
Syntax
management access-class {console-only | name }
no management access-class
• name — A valid access-list name. (Range: 1–32 characters)
•
console-only — The switch can be managed only from the console.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 1050 Monday, January 25, 2016 1:25 PM