Administrator Guide

Dell Networking CLI 104
Address Table
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-lists Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
clear mac address-table Removes any learned entries from the
forwarding database.
PE
mac address-table aging-
time
Sets the address table aging time. GC
mac address-table multicast
forbidden address
Forbids adding a specific multicast address to
specific ports.
IC
mac address-table static vlan Registers MAC-layer multicast addresses to the
bridge forwarding table, and adds static ports to
the group.
IC
switchport port-security
(Interface Configuration)
Disables new address learning on an interface. IC
show mac address-table Displays dynamically created entries in the
bridge-forwarding database.
PE
show mac address-table
address
Displays all entries in the bridge-forwarding
database for the specified MAC address.
UE or
PE
show mac address-table
count
Displays the number of addresses present in the
Forwarding Database.
PE
show mac address-table
dynamic
Displays all entries in the bridge-forwarding
database.
UE or
PE
show mac address-table
interface
Displays the mac forwarding table entries for a
specific interface.
UE or
PE
show mac address-table
multicast
Displays Multicast MAC address table
information.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 104 Monday, January 25, 2016 1:25 PM