Administrator Guide

Dell Networking CLI 105
Auto-VoIP
CDP Interoperability
show mac address-table
static
Displays statically created entries in the bridge-
forwarding database.
PE
show mac address-table vlan Displays all entries in the bridge-forwarding
database for the specified VLAN.
UE or
PE
show port-security Displays the port-lock status. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
switchport voice detect auto Enables the VoIP Profile on all the interfaces of
the switch.
GC or
IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
Command Description Mode
a
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC or
IC
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp entry Displays ISDP entries. PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 105 Monday, January 25, 2016 1:25 PM