Administrator Guide

Dell Networking CLI 107
DHCP Snooping
show dhcp l2relay vlan Displays whether DHCP L2 Relay is
globally enabled on the specified VLAN or
VLAN range.
PE or
GC
show dhcp l2relay circuit-id
vlan
Displays whether DHCP L2 Relay is
globally enabled and whether the DHCP
Circuit-ID option is enabled on the
specified VLAN or VLAN range.
PE or
GC
show dhcp l2relay remote-id
vlan
Displays whether DHCP L2 Relay is
globally enabled and shows the remote ID
configured on the specified VLAN or
VLAN range.
PE or
GC
clear dhcp l2relay statistics
interface
Resets the DHCP L2 Relay counters to
zero.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
clear ip dhcp snooping
binding
Clears all DHCP Snooping entries. PE
clear ip dhcp snooping
statistics
Clears all DHCP Snooping statistics. PE
ip dhcp snooping Enables DHCP snooping globally or on a
specific VLAN.
GC or
IC
ip dhcp snooping binding Configures a static DHCP Snooping binding. GC
ip dhcp snooping database Configures the persistent location of the DHCP
snooping database.
GC
ip dhcp snooping database
write-delay
Configures the interval in seconds at which the
DHCP Snooping database will be stored in
persistent storage.
GC
ip dhcp snooping limit Controls the maximum rate of DHCP
messages.
IC
ip dhcp snooping log-invalid Enables logging of DHCP messages filtered by
the DHCP Snooping application.
IC
Command Description Mode
a
2CSNXXX_SWUM204.book Page 107 Monday, January 25, 2016 1:25 PM