Administrator Guide

Audio Visual Bridging Commands 1096
Enabling MMRP on a port channel associated Ethernet interface has no
effect as long as the interface is a member of the port channel.
MMRP must also be enabled globally in order to become operational.
This command is only available on the Dell Networking N4000 Series
switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables MMRP on port channel 1.
console(config)#interface po1
console(config-if-Po1)#mmrp
mmrp global
Use the mmrp global command to globally enable MMRP. Use the no form of
the command to globally disable MMRP.
Syntax
mmrp global
no mmrp global
Default Configuration
By default, MMRP is disabled globally and on all interfaces.
Command Mode
Global Configuration
User Guidelines
MMRP is not compatible with GVRP/GMRP. Do not enable MMRP on
switches enabled for GVRP/GMRP.
IGMP snooping can interfere with MMRP/MVRP. Disable IGMP snooping if
using MMRP/MVRP.
2CSNXXX_SWUM204.book Page 1096 Monday, January 25, 2016 1:25 PM