Administrator Guide

Audio Visual Bridging Commands 1106
Command Mode
Privileged Exec, Global Configuration, and all submodes
User Guidelines
MVRP is not compatible with GMRP. Do not enable GMRP/GVRP on MVRP
enabled switches.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following shows example CLI display output for the command.
console#show mvrp summary
MVRP global state.............................. Disabled
MVRP Periodic State Machine state.............. Disabled
VLANs created via MVRP......................... 20-45, 3001-3050
The following shows example CLI display output for the command.
(Switching) #show mvrp interface 0/12
MVRP interface state........................... Enabled
VLANs declared................................. 20-45, 3001-3050
VLANs registered............................... none
show mvrp statistics
Use this command to display the MVRP statistics for an interface or globally.
Syntax
show mvrp statistics { interface-id }
• interface-id —Displays the MVRP statistics for the specified interface.
Default Configuration
By default, the global statistics are displayed.
Command Mode
Privileged Exec, Global Configuration, and all submodes
2CSNXXX_SWUM204.book Page 1106 Monday, January 25, 2016 1:25 PM