Administrator Guide

Dell Networking CLI 109
Ethernet Configuration
ip arp inspection vlan Enables Dynamic ARP Inspection on a single
VLAN or a range of VLANs.
GC
permit ip host mac host Configures a rule for a valid IP address and
MAC address combination used in ARP packet
validation.
ARPA
show arp access-list Displays the configured ARP ACLs with the
rules.
PE
show ip arp inspection Displays the Dynamic ARP Inspection
configuration.
PE
show ip arp inspection vlan Displays the Dynamic ARP Inspection
configuration on all the VLANs in the given
VLAN range.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
clear counters Clears statistics on an interface. PE
description Adds a description to an interface. IC
flowcontrol Configures the flow control on a given interface. GC or
IC
interface Enters the interface configuration mode to
configure parameters for an interface.
GC or
IC
interface range Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
GC or
IC or
IR
link debounce time Configures the debounce timer for one or
multiple interfaces.
IC or
IR
rate-limit cpu Reduces the amount of unknown
unicast/multicast packets forwarded to the
CPU.
GC
show interfaces Lists the traffic statistics for one or multiple
interfaces.
PE
Command Description Mode
a
2CSNXXX_SWUM204.book Page 109 Monday, January 25, 2016 1:25 PM