Administrator Guide

Dell Networking CLI 111
Ethernet CFM
a. For the meaning of each Mode abbreviation, see Mode Types on page 100.
Command Description Mode
a
ethernet cfm domain Enters into maintenance domain Configuration
mode for an existing domain. Use the optional
level parameter to create a domain and enter
into maintenance domain Configuration mode.
GC
service Associates a VLAN with a maintenance domain. MDC
ethernet cfm cc level Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
GC
ethernet cfm mep level Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
IC
ethernet cfm mep enable Enables a MEP at the specified level and
direction.
IC
ethernet cfm mep active Activates a MEP at the specified level and
direction.
IC
ethernet cfm mep archive-
hold-time
Maintains internal information on a missing
MEP.
IC
ethernet cfm mip level Creates a Maintenance Intermediate Point
(MIP) at the specified level.
IC
ping ethernet cfm Generates a loopback message (LBM) from
the configured MEP.
PE
traceroute ethernet cfm Generates a link trace message (LTM) from the
configured MEP.
PE
show ethernet cfm errors Displays the cfm errors. PE
show ethernet cfm domain Displays the configured parameters in a
maintenance domain.
PE
show ethernet cfm
maintenance-points local
Displays the configured local maintenance
points.
PE
show ethernet cfm
maintenance-points remote
Displays the configured remote maintenance
points.
PE
show ethernet cfm statistics Displays the CFM statistics. PE
2CSNXXX_SWUM204.book Page 111 Monday, January 25, 2016 1:25 PM