Administrator Guide

Data Center Technology Commands 1166
Peer ETS Configuration:
Willing: False Peer ETS Detected: True Credit Shaper: True
Traffic Classes Supported: 8
Priority Assignment: 0:0 1:1 2:1 3:0 4:0 5:1 6:0 7:0
Traffic Class Bandwidth: 0:00 1:10 2:12 3:00 4:00 5:78 6:00 7:00
Traffic Selection Algorithm: 0:0 1:1 2:2 3:0 4:0 5:3 6:0 7:0
Peer ETS Recommendation:
Traffic Class Bandwidth: 0:0 1:1 2:2 3:0 4:0 5:3 6:0 7:0
Traffic Selection Algorithm: 0:0 1:1 2:2 3:0 4:0 5:3 6:0 7:0
Peer Application Priority
Type Application Priority
-------------------------------------
Ethernet FC0E 3
TCP/SCTP 3260 4
Enhanced Transmission Selection (ETS)
Commands
NOTE: Enhanced Transmission Selection commands are only supported on N4000 series
switches. CLI commands and Dell OpenManage Switch Administrator pages are
not available for other switch models.
classofservice traffic-class-group
This command maps the internal Traffic Class to an internal Traffic Class
Group (TCG). The Traffic Class can range from 0-6, although the actual
number of available traffic classes depends on the platform.
Use the no form of this command to return system (Global Configuration
mode) or interface (Interface Configuration mode) to the default mapping.
Syntax
classofservice traffic-class-group trafficclass traffic class group
no classofservice traffic-class-group
• trafficclass — The selected traffic class. Range is 0-6.
• trafficclassgroup — The selected group. Range 0-2.
2CSNXXX_SWUM204.book Page 1166 Monday, January 25, 2016 1:25 PM